QuantiForce Brass LIVE with mouthpiece clamp
Screw the mouthpiece clamp completely into the force plate of the sensor, but don’t tighten it.
The sensor is still loose at this time.
Position the sensor so that the clamp on the backside of the sensor is on a straight part of the leadpipe to ensure a correct 90° mounting angle. Refer to the green zones in the example drawings.
Turn each clamp’s handle clockwise until it is tight.
Check that the sensor is perpendicular to the pipe. If not, repeat the previous the previous two steps.
Turn the mouthpiece clamp counter-clockwise until you feel the mouthpiece is loosened from the leadpipe just slightly.
QuantiForce Brass LIVE with mouthpiece adapter
Fasten the clamp at the backside of the sensor.
Turn counterclockwise until you feel the mouthpiece is loosened.
Hold the trumpet in horizontal position without touching the mouthpiece, then tap the
↓0button. The force display is set to zero.
QuantiForce Brass PRO SLIM
Let the pipe’s end protrude slightly.
Push the mouthpiece completely into the leadpipe, as usual.
Position it so that it touches the sensor.
Rotate clockwise until you feel the mouthpiece is just loosened from the leadpipe.
…and tap on “Ok”.
QuantiForce Brass PRO
Turn the disc until the mouth piece is just slightly pulled out of the pipe.